XWZY-1系列万能制样机

XWZY-1系列万能制样机由试样切割部分、缺口制样部分、哑铃制样部分三部分组成。试样切割部分用于切割条形试样、管材试样。缺口制样部分用于制备简支梁、悬臂梁冲击试验的试样样条缺口。哑铃制样部分用于制备各种非金属材料拉伸试验用标准哑铃试样或非标准试样。三种功能集于一身，便于实现制样全过程。制样主动力分别由电机驱动，带动铣刀及锯片旋转切割试样。各个方向进给用导轨进行导向，移动平稳。夹具方便灵活，适用于多种试样的制作。为防止试样加工发热变形，制样过程采用水冷却，由水泵进行水循环。该万能制样机结构紧凑、操作方便、进给平稳、制样迅速准确。

为安全起见本仪器操作按扭均为急停按扭，既旋转打开按下停止。
该机分为两种：XWZY-1型 自然冷却     XWZY-2型 水冷
技术参数
一、    缺口制样部分
缺口制样部分主要用于制备简支梁、悬臂梁冲击试验的试样样条缺口。该机主要技术参数符合GB/T1043-1993、GB/T1843-1996、ISO179-1993、ISO180-1993等标准要求。其结构简单，操作方便，试样制备快速，尺寸准确，是试样缺口制备的理想设备。
1、技术规格
额定功率：180W
额定电压：220V
铣刀转速：1400r/min
走刀行程：50mm
夹紧行程：60mm
横向行程：40mm
提升行程：20mm
工作台面尺寸：长×宽=500mm×380mm
试样类型：1、2、3、4型
铣刀参数：
A型刀具：直径Φ63mm，45º±30'，R=0.25±0.025mm
B型刀具：直径Φ63mm，45º±30'，R=1.0±0.025mm
C2型刀具：直径Φ60mm，厚度2.0±0.1mm，R<0.1mm
C2型刀具：直径Φ60mm，厚度0.8±0.1mm，R<0.1mm(选购)
二、    哑铃制样部分
哑铃制样部分用于制备各种非金属材料拉伸试验用标准哑铃试样或非标准试样。该机制备的试样符合GB1040、GB8804.1、GB8804.2等标准。
技术规格：
电    源：AC220V±10%，600W
铣刀转速：2820r/min
铣刀直径：φ27mm
走刀行程：300mm
压紧行程：25mm
工作台面尺寸：长×宽=570mm×560mm
三、    试样切割部分
试样切割部分用于切割条形试样、管材试样。适用于各种形状，切割快速，尺寸准确。
技术规格：
电    源：AC220V±10%，750W
锯片转速：4000r/min
锯片直径：φ250mm
锯片厚度：3mm
锯片切割高度：45mm
切割行程：260mm
工作台面尺寸：长×宽=570mm×460mm

XWZY series universal system prototype
XWZY series universal system prototype a sample cutting gap, a dumbbell sample preparation, sample preparation of three parts.Specimen cutting part is used for cutting bar and tube sample.Gap part sample preparation used for preparation of simply supported beam and cantilever beam impact test article try all the gaps.Dumbbell part sample preparation was used to prepare all kinds of nonmetal materials tensile test with standard dumbbell specimen or non-standard.Three kinds of feature set in one, a sample is advantageous for the accounting process.Sample preparation serval respectively, driven by a motor drive the cutter and the saw blade rotation cutting sample.All directions feed using guide direction, moving smoothly.Fixture convenient and flexible, suitable for the production of a variety of sample.In order to prevent the hot deformation sample processing, sample preparation process adopts water cooling, the water pump for water circulation.The universal sampling machine structure is compact, easy to operate, stable feeding, rapid and accurate sample preparation.
To be on the safe side the instrument button are abrupt stop button operation, both open press stop rotating.
The machine is divided into two kinds: XWZY - natural cooling XWZY type 1-2 type water cooling
Technical parameters
One, the gap part sample preparation
Gap part sample preparation is mainly used for the preparation of simply supported beam and cantilever beam impact test article try all the gaps.Main technical parameters of the machine in accordance with GB/T1043-1993, GB /, ISO179 T1843-1996-1996, ISO180-1993 standard requirement.Its simple structure, convenient operation, fast sample preparation, precise size, it is an ideal equipment of sample preparation gap.
1, technical specifications,
Rated power: 180 w
Rated voltage: 220 v
The mill speed: 1400 r/min
Feeding schedule: 50 mm
Clamping stroke: 60 mm
Horizontal stroke: 40 mm
The ascension journey: 20 mm
The worktable size: length x width = 500 mm x 380 mm
Sample types: type 1, 2, 3, 4
Cutter parameters:
Type A tool: Φ diameter of 63 mm, 45 DHS plus or minus 30 ', R = 0.25 + / - 0.025 mm
Type B tool: Φ diameter of 63 mm, 45 DHS plus or minus 30 ', R = 1.0 + / - 0.025 mm
C2 type cutter: Φ 60 mm diameter, the thickness of 2.0 + / - 0.1 mm, R < 0.1 mm
C2 type cutter: Φ 60 mm diameter, the thickness of 0.8 + / - 0.1 mm, R < 0.1 mm (to buy)
Second, the dumbbell sample preparation section
Dumbbell part sample preparation was used to prepare all kinds of nonmetal materials tensile test with standard dumbbell specimen or non-standard.The machine preparation of sample conforms to GB1040, GB8804.1, GB8804.2 standard, etc.
Technical specifications:
Power source: AC220V plus or minus 10%, 600 w
The mill speed: 2820 r/min
Milling cutter diameter: phi 27 mm
Feeding schedule: 300 mm
Compression stroke: 25 mm
The worktable size: length x width = 570 mm x 560 mm
Part three, sample cutting
Specimen cutting part is used for cutting bar and tube sample.Suitable for all kinds of shapes, fast cutting, size accurate.
Technical specifications:
Power source: AC220V plus or minus 10%, 750 w
The saw blade rotation speed: 4000 r/min
Saw blade diameter: 250 mm
Saw blade thickness: 3 mm
Saw blade cutting height: 45 mm
Cutting stroke: 260 mm
The worktable size: length x width = 570 mm x 460 mm